Fitting the side screens

Technical Area for all the problems you have in the garage
Post Reply
simonjrwinter
T289R Member
T289R Member
Posts: 452
Joined: Sun Jan 03, 2010 8:25 pm
Location: London

Fitting the side screens

Post by simonjrwinter » Sat Sep 07, 2019 7:09 pm

In preparation for my upcoming paint job, I’m trying to do all the little jobs still outstanding (tonneau on hold...)
To that end I’ve started to fit the side screens. I followed the instructions to the letter but I’d appreciate opinions on how it looks so far.....
Simon
CC6C53E0-B077-46DB-815F-6A96665134A6.jpeg
EFF68AE5-AD17-4D87-8DA5-CCA3AC95AF09.jpeg
85E5C7A1-550B-4BE6-84D5-B8D36CCFCCCC.jpeg
D223FF84-8F01-4C13-845D-B4EBF805E30A.jpeg
95F0EDE8-8C5F-4A18-A998-D741320BCA96.jpeg
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.

simonjrwinter
T289R Member
T289R Member
Posts: 452
Joined: Sun Jan 03, 2010 8:25 pm
Location: London

Re: Fitting the side screens

Post by simonjrwinter » Sat Sep 07, 2019 9:50 pm

I’d also really appreciate some close up pictures of finished sidescreens if possible, both fitted and lose would be great. I was thinking about covering them myself. I can source the material and window channel.
Thanks
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.

User avatar
clive
T289R Member
T289R Member
Posts: 2874
Joined: Thu Mar 01, 2007 1:18 am
Location: Perth

Re: Fitting the side screens

Post by clive » Mon Sep 09, 2019 4:14 pm

Hope these are suitable.

Image

Image

Image

Image

Image
Cheers, Clive.

(If I'm not here I'm in my workshop or on the golf course!)

simonjrwinter
T289R Member
T289R Member
Posts: 452
Joined: Sun Jan 03, 2010 8:25 pm
Location: London

Re: Fitting the side screens

Post by simonjrwinter » Mon Sep 09, 2019 4:32 pm

Thank you Clive
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.

frenchy
Posts: 1
Joined: Thu May 02, 2019 6:52 pm

Re: Fitting the side screens

Post by frenchy » Mon Nov 04, 2019 7:39 am

simonjrwinter wrote:
Mon Sep 09, 2019 4:32 pm
Thank you Clive

KevinW
T289R Member
T289R Member
Posts: 237
Joined: Mon Dec 14, 2015 6:29 pm
Location: West Sussex

Re: Fitting the side screens

Post by KevinW » Wed Nov 06, 2019 2:10 pm

I have a similar gap on my bubbletop above the sidescreen frames as in Simon's last pic - in fact they aren't a very good fit round the curved part of the moulding either.

Be interested to see how you get on with this aspect.

User avatar
Azzy83
T289R Member
T289R Member
Posts: 13
Joined: Fri Jan 02, 2015 11:57 pm
Location: Melbourne, Australia

Re: Fitting the side screens

Post by Azzy83 » Thu Nov 07, 2019 6:47 am

Hope this helps
Attachments
C79EE434-4660-4B86-9614-DCB2D466AD94.jpeg

User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1063
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Fitting the side screens

Post by StewbieC » Thu Nov 07, 2019 9:44 am

You need a Nigel
Attachments
WP_20181117_15_08_02_Pro.jpg
________________________________________________
Stu
Hawk 289, maximum smiles per mile..

peterc
T289R Member
T289R Member
Posts: 1145
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Fitting the side screens

Post by peterc » Thu Nov 07, 2019 12:27 pm

I can’t see a roll over hoop.
Peter C

Post Reply