Gerry's rear axle parts

Technical Area for all the problems you have in the garage
Post Reply
simonjrwinter
Posts: 556
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Gerry's rear axle parts

Post by simonjrwinter » Mon Mar 23, 2020 9:25 am

At the end of November last year, I purchased from Gerry the Jag rear axle conversion kit.
The kit was missing "4 shock mounting rods and nuts" and Gerry emailed his supplier to ask him to post them directly to me. Despite several emails to both Gerry and his supplier, these have not been forthcoming (and in the current climate, I don't expect them to be)
So I am looking at sourcing these parts myself...trouble is, I have no idea what they are (apart from the above description) nor what dimensions they are.
Can anyone help? any part completed kit builders that have the parts they could measure for me?
Thank you.

Simon
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

User avatar
kdavies3
Forum member
Forum member
Posts: 44
Joined: Tue Feb 14, 2017 1:49 pm

Re: Gerry's rear axle parts

Post by kdavies3 » Mon Mar 23, 2020 10:00 am

Hi Simon, I've only recently fitted mine and they are still accessible.
I'll pull one out and take some pictures and measurements.
I waited ages for my kit but at least it was complete when it arrived.
Kev Davies
DAX Mk4, 383 Chevy Stroker, Tremec. SOLD
Contemporary CCX 3-4028, 445ci Big Block FORD FE,TKO 600. SOLD
Dax De Dion LS2 and T56. SOLD
1965 Ford Mustang 289 Convertible FOR SALE
In build Hawk 289 Sebring. :D

SiJackson
Forum member
Forum member
Posts: 73
Joined: Thu Sep 15, 2016 3:08 pm
Location: Northumberland, UK

Re: Gerry's rear axle parts

Post by SiJackson » Mon Mar 23, 2020 10:30 am

Are they not stock Jaguar parts? Upper or lower?

CobStang
Forum member
Forum member
Posts: 248
Joined: Sat Dec 10, 2011 3:21 pm

Re: Gerry's rear axle parts

Post by CobStang » Mon Mar 23, 2020 10:37 am

This is the lower shock mounting shaft. Call Martin Robey and ask for the nuts and washers to go with it. Or take it to your hardware store and get nuts and washers.
I suspect they will be either 7/16 or 1/2 UNF.
Assuming it is the bottom mount you are after.
https://www.martinrobey.com/jaguar/e-ty ... sion/21100

Hawk may use this Shaft on the top as well ? I am sure you can figure out something. Find out the shock pin diameter and the chassis hole diameter and go from there.

simonjrwinter
Posts: 556
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Gerry's rear axle parts

Post by simonjrwinter » Mon Mar 23, 2020 11:35 am

Thank you gents, much appreciated
Simon
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

simonjrwinter
Posts: 556
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Gerry's rear axle parts

Post by simonjrwinter » Mon Mar 23, 2020 11:59 am

Just measured. The tubes in the wishbones are 120mm long but the tubes in the diff support are 135mm
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

simonjrwinter
Posts: 556
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Gerry's rear axle parts

Post by simonjrwinter » Mon Mar 23, 2020 7:15 pm

Thanks for the advice gents, Gerry was kind enough to sort it for me, parts are on their way.
Simon
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1115
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Gerry's rear axle parts

Post by StewbieC » Tue Mar 24, 2020 11:36 am

CobStang wrote:
Mon Mar 23, 2020 10:37 am
This is the lower shock mounting shaft. Call Martin Robey and ask for the nuts and washers to go with it. Or take it to your hardware store and get nuts and washers.
I suspect they will be either 7/16 or 1/2 UNF.
Assuming it is the bottom mount you are after.
https://www.martinrobey.com/jaguar/e-ty ... sion/21100

Hawk may use this Shaft on the top as well ? I am sure you can figure out something. Find out the shock pin diameter and the chassis hole diameter and go from there.
Might be M14
________________________________________________
Stu
Hawk 289, maximum smiles per mile..

Post Reply