What is the recommended rear toe for a Hawk running Jaguar IRS - is it parallel or toe-in?
James
Rear Toe for Jag IRS
Re: Rear Toe for Jag IRS
I guess parallel should be OK but I have mine at 0.5mm toe in each side. Main thing is to get it equal e.g. not toe in one side and toe out the other!
I ran for quite a few years without knowing.
I have just checked the Jag manual and it quotes parallel +/- 1/32” which is 0.8 mm total or 0.4 per side.
So perhaps mine is slightly too much toe in.
Not sure I would be able to measure 0.4mm accurately using the string method.
Peter C
I ran for quite a few years without knowing.
I have just checked the Jag manual and it quotes parallel +/- 1/32” which is 0.8 mm total or 0.4 per side.
So perhaps mine is slightly too much toe in.
Not sure I would be able to measure 0.4mm accurately using the string method.
Peter C