Quad webbers

289, FIA & Daytona topics
Post Reply
simonjrwinter
Posts: 627
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Quad webbers

Post by simonjrwinter » Fri Sep 20, 2019 6:00 pm

Any idea what these would be worth?
Webber 48 IDA’s jetted currently for a 351
Intake manifold is an FAV style
5883C324-54F0-4043-9E94-C99DF83C3A20.jpeg
8FB54672-7101-4969-85E1-0ABF960A6C2B.jpeg
Simon
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

peterpjb
Forum member
Forum member
Posts: 21
Joined: Tue Feb 02, 2016 10:51 am

Re: Quad webbers

Post by peterpjb » Sat Sep 21, 2019 6:43 pm

Italian or Spanish Weber’s?

simonjrwinter
Posts: 627
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Quad webbers

Post by simonjrwinter » Sat Sep 21, 2019 8:24 pm

Italian
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

peterpjb
Forum member
Forum member
Posts: 21
Joined: Tue Feb 02, 2016 10:51 am

Re: Quad webbers

Post by peterpjb » Sun Sep 22, 2019 3:24 pm

so then: Italian Webers from the 70th upwards, I would suppose 500-900 £ each depending on condition, manifold the same
complete rebuild would cost the same amount again
(the original Cobra sixties Webers have no ears, ...much more expensive)

simonjrwinter
Posts: 627
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Quad webbers

Post by simonjrwinter » Sun Sep 22, 2019 9:57 pm

Ok so 1500 the Lot quite a good deal then?
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

peterpjb
Forum member
Forum member
Posts: 21
Joined: Tue Feb 02, 2016 10:51 am

Re: Quad webbers

Post by peterpjb » Mon Sep 23, 2019 9:44 am

I would think so

peterc
T289R Member
T289R Member
Posts: 1280
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: Quad webbers

Post by peterc » Mon Sep 23, 2019 1:27 pm

Simon, my limited knowledge of the Weber’s is that IDA’s are race carbs and will flow more air and give more power at the top end. IDF’s are more suitable for the road.
There might be a difference in height so you need to check if they will fit under the bonnet without a serious mod to the bonnet bulge.
Peter C

simonjrwinter
Posts: 627
Joined: Sun Jan 03, 2010 8:25 pm
Location: Upminster, Essex.

Re: Quad webbers

Post by simonjrwinter » Mon Sep 23, 2019 3:15 pm

It’s ok peter, I’m not after them for my car...😊
TR6 (V8) Hawk 289 FIA (V8) GD MK3 (V8) Doing my bit for global warming.

peterpjb
Forum member
Forum member
Posts: 21
Joined: Tue Feb 02, 2016 10:51 am

Re: Quad webbers

Post by peterpjb » Tue Sep 24, 2019 12:50 pm

peterc wrote:
Mon Sep 23, 2019 1:27 pm
Simon, my limited knowledge of the Weber’s is that IDA’s are race carbs and will flow more air and give more power at the top end. IDF’s are more suitable for the road.
..but not suitable to originality ;)

Post Reply