panhard rod fettling
panhard rod fettling
Morning gentlemen, I recall seeing a diagram from someone, probably Stuart, Clive or Peter regarding the bend in the rod to clear the diff, but can I find it using search!?!? Would you be so kind as to re posting it, tried fitting mine but guess what .
Regards
Ken
Ken
Re: panhard rod fettling
Not from me I'm afraid. I have a Jag rear end.
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
Re: panhard rod fettling
Hi Ken,
I don't know if the diagrams you mention were posted using Photobucket, but a while ago all pictures posted that way were deleted as Photobucket no longer supports forum posts so all pictures were lost.
I don't know if the diagrams you mention were posted using Photobucket, but a while ago all pictures posted that way were deleted as Photobucket no longer supports forum posts so all pictures were lost.
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
Re: panhard rod fettling
Thanks Clive, don't think it was a photobucket it was just a drawing with dims. on it from memory. more searching needed I guess
Regards
Ken
Ken
- StewbieC
- T289R Committee
- Posts: 1361
- Joined: Mon Oct 13, 2008 12:50 pm
- Location: out in the sticks, Shropshire
Re: panhard rod fettling
This any help? You could do with offering it up as there may be slight differences car to car. It only needs to clear the bulge in the cover plate towards the top as the bump stops will bottom out before it hits the diff cover plate any lower.
You do not have the required permissions to view the files attached to this post.
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..