Hi All,
I have a set of side windows for my BRA, the frames for which are bare aluminium as shown below:
.
I have a seen a few Cobras which have the side window frames in a black finish which looks good (example below). Is this a painted finish or a coating which is bonded to the aluminium frame?
I would appreciate any guidance that can be offered on how the black finish is achieved.
Many Thanks,
Side Windows - Black Finish?
Side Windows - Black Finish?
You do not have the required permissions to view the files attached to this post.
Kev
BRA 289
BRA 289
Re: Side Windows - Black Finish?
Most are covered in mohair.
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)
- StewbieC
- T289R Committee
- Posts: 1358
- Joined: Mon Oct 13, 2008 12:50 pm
- Location: out in the sticks, Shropshire
Re: Side Windows - Black Finish?
The frames are covered in black Mohair.
A good trimmer will be able to sort that for you
A good trimmer will be able to sort that for you
________________________________________________
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Stu
Hawk 289, 66 Mustang Fastback with a 289 maximum smiles per mile..
Re: Side Windows - Black Finish?
Thanks for the help chaps.
Makes sense now
I didn’t think they looked painted, and that’s why.
Makes sense now
I didn’t think they looked painted, and that’s why.
Kev
BRA 289
BRA 289
- David Large
- Posts: 1045
- Joined: Tue Apr 03, 2007 7:28 am
- Location: Walsall
Re: Side Windows - Black Finish?
Mine are not covered in mohair but in a black sort of vynil cloth. My hood is not mohair either but is an equally lightweight vynil sort of material. Roger King told me that my hood was just like the original hoods - there's a stroke of luck!
- nikbj68
- T289R Member
- Posts: 1475
- Joined: Thu Jul 17, 2008 3:31 pm
- Location: Anglesey, North Wales.
- Contact:
Re: Side Windows - Black Finish?
As David mentions, the original Sidescreens and soft top (and the bag for stowing the screens in) were a ‘leatherette’ vinyl, but mohair is almost exclusively used now... has anyone actually priced the difference between vinyl & mohair? I’d be interested to know how much more (or less!) vinyl would be.
Hawk 289 FiA...AT LAST!!!
Re: Side Windows - Black Finish?
Not forgetting it’s the man hours that’s probably the biggest cost.
Peter C
Peter C
- David Large
- Posts: 1045
- Joined: Tue Apr 03, 2007 7:28 am
- Location: Walsall
Re: Side Windows - Black Finish?
The big advantage for me is that the vynil hood takes up far less space when folded up and stored in the boot.
David
David
Re: Side Windows - Black Finish?
Before I started on my hardtop project I got some quotes, and it was about £150-200 difference between mohair and vynil IIRC.
Significant difference in material cost, but dwarfed by the labour cost which is the lions share.
Significant difference in material cost, but dwarfed by the labour cost which is the lions share.
- Roger King
- Posts: 4396
- Joined: Mon Mar 19, 2007 10:29 pm
- Location: St Ives, Cambs
Re: Side Windows - Black Finish?
David is correct - original Cobras of all varieties had hoods made of black Vynide. Tonneau covers were also Vynide, and the sidescreens should be trimmed in Vynide also. I was lucky enough to get detailed information on the construction of these parts from a couple of 1964 cars in the US, giving information on stitch lines, size of segments etc. so could copy the original spec as closely as possible. The original hoods were, as ever, made down to a price and were not made to last, but several are in decent condition to copy as they haven't been used much.
The biggest difficulty now is that nobody makes a leathercloth with the correct pale cream backing material - a light grey is as close as you can get now.
The cost of having these items (hood, tonneau and sidescreens covered) made to the original patterns would be considered prohibitive to anyone with half a brain. Unfortunately that doesn't include me. My work was done by Simtrim in Spalding, but if you contact them for a quote be sure to sit down first.
US original:
Mine, with sidescreens:
Detail of how tonneau fixes around mirror to press stud, if closed on one side only:
Hope that helps,
Roger
The biggest difficulty now is that nobody makes a leathercloth with the correct pale cream backing material - a light grey is as close as you can get now.
The cost of having these items (hood, tonneau and sidescreens covered) made to the original patterns would be considered prohibitive to anyone with half a brain. Unfortunately that doesn't include me. My work was done by Simtrim in Spalding, but if you contact them for a quote be sure to sit down first.
US original:
Mine, with sidescreens:
Detail of how tonneau fixes around mirror to press stud, if closed on one side only:
Hope that helps,
Roger
You do not have the required permissions to view the files attached to this post.