Just thought I would post this on the back of some emails with Peter Adams, linked to the IRS hubs and the number of turns you are able to get from the plain two eared spinners. Peter had commented that he had only been getting c. 2 3/4 turns on the spinners before they were hand tight and I found the same following my change from MG to Jag rear.
I spoke with MWS who confirmed that they are selling the AC spinners with additional thread. This additional thread extends beyond the inner face of the spinner and gives an additional half turn before hand tight. Not earth shattering but gives a little additional peace of mind. There seemed to be some uncertainty about the existence of such spinners so just thought I would share here.
Part numbers from MWS are KCK292RH and KCK293LH if interested.
Dave.
MWS Wire wheel AC spinners with additional thread
- Dave Woodward
- T289R Member
- Posts: 917
- Joined: Sun May 06, 2007 10:00 pm
- Location: Cheshire
- Contact:
MWS Wire wheel AC spinners with additional thread
You do not have the required permissions to view the files attached to this post.
__________________________________
I say, ding dong!
I say, ding dong!