Radiator hoses for Rover installation

Information about builds and rebuilds, post away!
stu60
Posts: 115
Joined: Fri Jul 08, 2016 10:09 am
Location: Cheltenham
Contact:

Re: Radiator hoses for Rover installation

Post by stu60 »

Hi
For hose from thermostat I purchased silicone standard black hose with 30? Degree bend. I then took opportunity to install relief valve to let any air out. You will need to fit a standard SchrAder valve in the aluminium housing I bought from eBay as per below. I did have the thermostat housing modded so the angle was lowered from standard item.

eBay search for : Alloy T Piece Temp Adapter Water Coolant Sensor Silver Temperature Hose Gauge
Attachments
3CB64A04-DFA1-4A74-AE29-1EBC81EB1391.jpeg
95301F98-57F1-4D7A-A259-0236CFE05FF1.jpeg
1B8A49D6-C600-417C-8AED-DC2FC1A568BB.jpeg
8053F8D4-55F3-425F-881C-BCDE35BCA493.jpeg
stu60
Posts: 115
Joined: Fri Jul 08, 2016 10:09 am
Location: Cheltenham
Contact:

Re: Radiator hoses for Rover installation

Post by stu60 »

Oops forget picture of my cayman! Finger trouble without my glasses!
User avatar
clive
T289R Member
T289R Member
Posts: 3123
Joined: Thu Mar 01, 2007 1:18 am
Location: Perth
Contact:

Re: Radiator hoses for Rover installation

Post by clive »

Why do you need a relief valve next to the expansion tank?
Cheers, Clive.

(If I'm not here I'm in my workshop or on the golf course!)
stu60
Posts: 115
Joined: Fri Jul 08, 2016 10:09 am
Location: Cheltenham
Contact:

Re: Radiator hoses for Rover installation

Post by stu60 »

Hi it’s only for the initial fill to get any air out as it’s the high point in the system with the angle of the hose. Probably a bit belt and braces but seems to work for me.
User avatar
peterc
Posts: 1501
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey
Contact:

Re: Radiator hoses for Rover installation

Post by peterc »

I use the real steel thermostat housing as Gerry’s recommendation. Yes, the hose does rise slightly on its way to the header tank but the air is bled out via the header tank. With a closed system my header tank is filled right to the brim and overflows to a separate bottle. The air bubbles out into the overflow tank and then sucks spare coolant back in.
Has worked well for 15 years of more.
Peter C
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests