BRA289 customized recreation

[Migge]

Here a pic of the semi finished front frame. Welding not finished and still missing some more tubes and brackets

[Migge]

Jag hub with vented/sloted disc, need another stub axle nut, to thick to reach the nyloc

[Migge]

A view with a wheel on which will be changed to black

[Roger King]

Are you adapting a stock frame, or building from scratch? Is the BRA frame square tube?

Good fun, this fabrication!

[Migge]

Hi Roger,

It's a very old BRA square tube frame I'm using. I just wanted to get a piece of the old frame left . The rear (from a Griffith 500) is nearly finshed except for the tubes under the boot section. Front will take another few months because of very limited time. To make the whole frame stiff it will get a welded tunnel frame connected to the front and rear, later covered with aluminium.
Cheers
Migge

[Migge]

If you want to use Wilwood Dynalite calipers on Jaguar hub carriers you have to do some work on the aluminium brackets. For MGB they are available

Standard bracket with two holes for the caliper

[Migge]

Where is the position of the caliper?

[Migge]

Measurement and layout how the caliper should look like

[Migge]

12mm off in aradius made by a friend

[Migge]

get the shape with an angle grinder and a file and sanding paper