Wanted - spinners and steering wheel for IVA

For Sale and Wanted Section
Post Reply
Neil Summers
T289R Member
T289R Member
Posts: 3
Joined: Sun Mar 12, 2017 8:31 am

Wanted - spinners and steering wheel for IVA

Post by Neil Summers » Thu Sep 03, 2020 8:40 am

Hi all,

We are putting our Hawk 289 Sebring through its IVA shortly and need the following IVA compliant parts:

1. Spinners x 4 (same thread as aluminium type supplied by Gerry Hawkridge)
2. Steering wheel and centre boss (same fitting as Hawk steering wheel from Gerry again)

Happy to buy or borrow - whichever is possible. Please let us know if you can help. Thanks!

Mike and Neil Summers

User avatar
kdavies3
Posts: 112
Joined: Tue Feb 14, 2017 1:49 pm
Location: Cowbridge South Wales

Re: Wanted - spinners and steering wheel for IVA

Post by kdavies3 » Thu Sep 03, 2020 9:19 am

That's a coincidence Neil,
I was just about to post something very similar.
I'm also about to apply for my IVA on my Hawk Sebring.
I'm also looking to buy or borrow a set of IVA spinners / nuts for Gerry's FIA wheels.
Already sorted for a steering wheel though.
Kev Davies
DAX Mk4, 383 Chevy Stroker, Tremec. SOLD
Contemporary CCX 3-4028, 445ci Big Block FORD FE,TKO 600. SOLD
Dax De Dion LS2 and T56. SOLD
1965 Ford Mustang 289 Convertible SOLD
In build Hawk 289 (302) Sebring. :D

User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1196
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Wanted - spinners and steering wheel for IVA

Post by StewbieC » Fri Sep 04, 2020 9:41 am

I have a steering wheel with collapsible boss and nuts for wires,both but are in use until the end of September
________________________________________________
Stu
Hawk 289, maximum smiles per mile..

User avatar
kdavies3
Posts: 112
Joined: Tue Feb 14, 2017 1:49 pm
Location: Cowbridge South Wales

Re: Wanted - spinners and steering wheel for IVA

Post by kdavies3 » Fri Sep 04, 2020 10:56 am

Hi Stewbie,
I assume those nuts won't work with alloy FIA wheels?

My boss isn't a collapsible one but I don't think it's required as we have a double jointed steering linkage?
Kev Davies
DAX Mk4, 383 Chevy Stroker, Tremec. SOLD
Contemporary CCX 3-4028, 445ci Big Block FORD FE,TKO 600. SOLD
Dax De Dion LS2 and T56. SOLD
1965 Ford Mustang 289 Convertible SOLD
In build Hawk 289 (302) Sebring. :D

User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1196
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Wanted - spinners and steering wheel for IVA

Post by StewbieC » Fri Sep 04, 2020 12:12 pm

kdavies3 wrote:
Fri Sep 04, 2020 10:56 am
My boss isn't a collapsible one but I don't think it's required as we have a double jointed steering linkage?
I'm not sure if the nuts will fit, PM John Housego to see how he resolved it.
As to the boss, technically you are right and if you follow the manual you are correct but it does seem to be the new thing with testers.
________________________________________________
Stu
Hawk 289, maximum smiles per mile..

Tim Curtis
Posts: 30
Joined: Mon Jan 28, 2019 8:43 pm

Re: Wanted - spinners and steering wheel for IVA

Post by Tim Curtis » Thu Sep 10, 2020 8:42 pm

what steering wheel are people using for the IVA

User avatar
StewbieC
T289R Committee
T289R Committee
Posts: 1196
Joined: Mon Oct 13, 2008 12:50 pm
Location: out in the sticks, Shropshire

Re: Wanted - spinners and steering wheel for IVA

Post by StewbieC » Fri Sep 11, 2020 9:59 am

Hi Tim,
I used the MGB wheel off my donor car. I had to make an interface adaptor to fit to the Cobra boss, but it works a treat. The horn push, isn't connected and there's no symbol on it to cause the tester a concern. It also adds a soft and padded element to the centre of the wheel.
________________________________________________
Stu
Hawk 289, maximum smiles per mile..

Tim Curtis
Posts: 30
Joined: Mon Jan 28, 2019 8:43 pm

Re: Wanted - spinners and steering wheel for IVA

Post by Tim Curtis » Sat Sep 12, 2020 2:36 pm

great many thanks,

Post Reply