FIA wheels

For Sale and Wanted Section
Post Reply
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

FIA wheels

Post by Migge »

Looking for a set of FIA wheels. Prefer 5 lug 6.5" x 15" and 8.5" x 15" but offer anything you have.

Cheers
Migge
User avatar
peterc
T289R Member
T289R Member
Posts: 2038
Joined: Wed Mar 05, 2014 9:05 am
Location: Surrey

Re: FIA wheels

Post by peterc »

Migge,
I think that you need to clarify the requirement of 5 lug.
Older versions of a Hawk FIA with those sizes of wheel I think all have MGB spline drive inserts. E.g. mine does.
The later FIA wheels are 7.5” front and 9.5” rear and have pin drive.
It’s an expensive conversion to change the hubs to peg/pin drive.
Peter C
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: FIA wheels

Post by Migge »

I don't know exactly what hubs I'll use and have to change but I'll mount Trigo adapters with 4.75" bold pattern like Jaguar. I need 5 lug wheels. Trigo, Team III, Vintage etc. all sell only 7.5" and 9.5" size. PSV has no inventory of FIA wheels at all and they don't make them anymore. Tha's very bad, becuase the were the only company producing these sizes with 5-lug. You can get 6-pin wheels but that's out of my range, money wise :-)
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: FIA wheels

Post by Migge »

Still looking for two rear wheels. Prefer 7.5" or 8.5". Doesn't matter if spline drive or 6-pin drive
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: FIA wheels

Post by Migge »

Come on guys, someone has the wheels laying around and just cannot decide to sell them :-)
Special customized BRA289
Post Reply