Just out of interest, has anybody fitted four/five point seatbelts in a Hawk? If so how was it achieved?
Thanks
Simon
Full harness belts in a Hawk
- simonjrwinter
- Posts: 1370
- Joined: Sun Jan 03, 2010 8:25 pm
- Location: Upminster, Essex.
Full harness belts in a Hawk
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
Re: Full harness belts in a Hawk
Hi Simon
I have a four point harness in my FIA
The lap straps are mounted using eye bolts screwed into the standard seatbelt mounts on the floor. For the shoulder straps, I had four threaded bosses welded onto the cross member of the seatbelt frame behind the seats. Eye bolts then screw into these to provide the mounting point.
Andy
I have a four point harness in my FIA
The lap straps are mounted using eye bolts screwed into the standard seatbelt mounts on the floor. For the shoulder straps, I had four threaded bosses welded onto the cross member of the seatbelt frame behind the seats. Eye bolts then screw into these to provide the mounting point.
Andy
- simonjrwinter
- Posts: 1370
- Joined: Sun Jan 03, 2010 8:25 pm
- Location: Upminster, Essex.
Re: Full harness belts in a Hawk
Thanks Andy
TR6 (V8) Hawk 289 FIA (V8) Doing my bit for global warming.
Re: Full harness belts in a Hawk
Personally I wouldn’t want a full harness unless I had a full width roll over bar.
Peter C
Peter C
Re: Full harness belts in a Hawk
Im still thinking what to do. 2 points is the easyest but unsafe? 3 points doesnt look that cool. 4 points is hard to get in!
Grtz Frank. so im thinking about 4 or 2 points. advice needed LOL
Grtz Frank. so im thinking about 4 or 2 points. advice needed LOL