Wanted 289 FIA part built kit
Wanted 289 FIA part built kit
Hi I’m looking for a 289 FIA unfinished project, apologies to be specific but it has to be a FIA based kit. Any state of build considered but I will not need the engine or gearbox as I have a specific build spec in mind. Please PM me your details. Thanks, Lee
- nikbj68
- T289R Member
- Posts: 1475
- Joined: Thu Jul 17, 2008 3:31 pm
- Location: Anglesey, North Wales.
- Contact:
Re: Wanted 289 FIA part built kit
You could broaden your likely results by searching for any Hawk Ace, 260/289, Sebring etc, and graft on the FIA arches/oil cooler etc, as the central body section of all Hawks is the same, you could then be more choosy about which suspension setup is fitted.
(I would recommend Nigel Pittard for the body mods if that isn’t your area of speciality, or you could order full side-sections from Gerry, subject to his waiting list, of course!)
Good luck!
(I would recommend Nigel Pittard for the body mods if that isn’t your area of speciality, or you could order full side-sections from Gerry, subject to his waiting list, of course!)
Good luck!
Hawk 289 FiA...AT LAST!!!
Re: Wanted 289 FIA part built kit
Just beware if going down the Ace 260/289 option as the doors are a different shape on the FIA
Cheers, Clive.
(If I'm not here I'm in my workshop or on the golf course!)
(If I'm not here I'm in my workshop or on the golf course!)