BRA289 customized recreation

Information about builds and rebuilds, post away!
Post Reply
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

BRA289 customized recreation

Post by Migge »

Here a pic of the semi finished front frame. Welding not finished and still missing some more tubes and brackets :-)
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

Jag hub with vented/sloted disc, need another stub axle nut, to thick to reach the nyloc
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

A view with a wheel on which will be changed to black
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Roger King
Posts: 4396
Joined: Mon Mar 19, 2007 10:29 pm
Location: St Ives, Cambs

Re: BRA289 customized recreation

Post by Roger King »

Are you adapting a stock frame, or building from scratch? Is the BRA frame square tube?

Good fun, this fabrication!
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

Hi Roger,

It's a very old BRA square tube frame I'm using. I just wanted to get a piece of the old frame left :-). The rear (from a Griffith 500) is nearly finshed except for the tubes under the boot section. Front will take another few months because of very limited time. To make the whole frame stiff it will get a welded tunnel frame connected to the front and rear, later covered with aluminium.
Cheers
Migge
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

If you want to use Wilwood Dynalite calipers on Jaguar hub carriers you have to do some work on the aluminium brackets. For MGB they are available :-(

Standard bracket with two holes for the caliper
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

Where is the position of the caliper?
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

Measurement and layout how the caliper should look like
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

12mm off in aradius made by a friend :-)
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
User avatar
Migge
Posts: 1982
Joined: Tue Feb 20, 2007 5:51 pm

Re: BRA289 customized recreation

Post by Migge »

get the shape with an angle grinder and a file and sanding paper
You do not have the required permissions to view the files attached to this post.
Special customized BRA289
Post Reply